75 HP

4-Stroke Design

World-renowned Honda quality combines proven reliability and superior fuel efficiency, with no oil mixing.

Lightweight

Weighing in at only 359 lbs, the BF75 is one of the lightest in its class.

Programmed Fuel Injection – Powerful performance

Programmed Fuel Injection delivers the precise amount of fuel/air to each cylinder. The result is easy starts and instant throttle response with superior fuel efficiency.

Lean Burn Control® – Superior fuel efficiency

Lean Burn Control® increases fuel efficiency by allowing combustion to operate on a leaner air/fuel mixture. At cruising speed, this engine runs on up to 20% less fuel* than others in its class.
*Based on EPA Specific Fuel Consumption Mode.

BLAST® System – improves acceleration at low speeds

Boosted Low Speed Torque, or BLAST, improves acceleration at low speeds. A quick movement of the throttle control activates the BLAST® system, advancing the ignition curve aggressively. “Hole Shot” is vastly improved as more horsepower gets the hull up on plane quicker.

High Performance Gearcase – gets you going faster

Designed to get you going faster, this all new gearcase reduces drag, greatly reduces hull porpoise and minimizes spray, thus increasing acceleration and top speed.
A longer anti-ventilation plate helps trap water flowing to the propeller to minimize porpoising, while a streamlined front and longer bullet reduce drag for enhanced acceleration and fuel efficiency. A front splash plate reduces spray from the hull bottom, maintaining a dry deck above, and a 2.33:1 gear ratio affords the use of 13- to 14-inch diameter propellers for heavier loads.

Torsion Dampener – improved handling.

Sometimes called a flywheel, it is located near the base of the powerhead. This design lowers the center of gravity for improved handling.

SOHC 4 Valve/Cyl. Design – max power

The BF75’s powerful 1.5L, 4-cylinder design utilizes a single overhead cam, and two intake valves to deliver maximum torque and power.

Legendary Honda Reliability

The technology we applied to our 75hp outboard engine is the very same that powers one of the most popular cars in the world, the Honda Fit.

3-Way Cooling System – Cool running durability

Three separate cooling systems keep the cylinder heads running cooler for long-term durability.

Engine Alert System – Keeps you informed

The Engine Alert System uses visual, audio and RPM reduction circuits to alert the operator of over-heating, low oil PSI and over-revving, preventing engine damage.

4-Front Corrosion Protection System – Fights the elements

The Corrosion Protection System is a patented “Double Sealed” multi-layered paint process. Sacrificial anodes and stainless steel technology, along with waterproof connectors, all enhance corrosion protection.

Top Mounted Electronics

The alternators, ignition and other critical electrical components are mounted near the top of the powerhead to stay cool and dry. The result? Dependable performance.

Sealed Starter – Protection for long life

The starter motor is inverted into a sealed chamber that protects the starter drive from the elements.

Positive Lubrication

A crankshaft-driven, automotive-style trochoid oil pump ensures long-term durability of critical engine components.

 

Fresh Water Flushport

Flushes debris and saltwater out of the engine, extending the life of the outboard.

Ultra Low 3 Star CARB Emissions

Environmentally conscious technology. All Honda Marine engines exceed the highest CARB 3-Star rating to meet the rigorous California Air Resource Board’s standards.

True 5 Warranty

Honda’s True 5 Warranty is the best in the business. This transferable, non-declining warranty is the same on the last day as it is on the first.

Superior Battery Charging – More usable power

There’s always plenty of electric power with Honda’s exclusive neodymium magnet flywheel. The alternator develops 44 amps in total and 35 amps of charging amps, it’s twice the output of some competitors. It provides high output and keeps battery banks charged all day, even when running multiple accessories.

Center Mount Tiller – Easier control

The ergonomically designed tiller handle is longer for improved handling. Adjustments for throttle and steering friction allow easier control. Up front shift lever, PTT switch, and engine alert lamps provide added convenience.

Easy Maintenance

An easy “screw-type” valve adjuster system requires no shims, which reduces maintenance costs. Front-mounted oil filter and oil filler make for easy maintenance.

 

Built-In Pitot Tube

Built-in pitot tube in the gear case eliminates the need to drill holes in your boat for installation.

 

 

Engine

Type 4-Stroke SOHC 4 Cylinder/16 Valves
Displacement 1,496 cc (91.4 cubic inches)
Bore & Stroke 73 mm x 89.4 mm (3.0 x 3.5 inches)
Full Throttle RPM Range 5,000-6,000 RPM
Rated Power 75 HP @ 5,500 RPM
Cooling System Water Cooled
Fuel Delivery Programmed Fuel Injection
Ignition System MicroComputer Programmed
Starting System Electric
Exhaust Through Hub
Lubrication Wet Sump
Trim Range -4° to +16°
Tilt Range 68°

Drive

Gear Ratio 2.33:1
Gear Shift F-N-R

Equipment

Alternator (Electric Start) 44-Amp (554 watt)
Battery Charging Power 35 Amp
Propeller Optional
Power Tilt NA
Power Trim & Tilt Standard
Gas Assisted Tilt NA
Oil Pressure Alert Standard
Temperature Alert Standard
Rev-Limiter Standard
Speedometer Pickup Standard

Dimensions

Overall Width 480 mm/18.9 inches

Dry Weight

L-Type 163 kg/359 lbs.

Transom Height

L Type 508 mm/20 inches

Operator’s Manuals

Manual Serial Number Size P/N
Digital Speedometer and Tachometer Operation Guides BBAJ-1000001-9999999 Download Buy 582.2 KB 31ZY3800

Owner’s Manuals

Serial Number Size P/N
BBAU-1000001-2999999 Download Buy 3.66 MB 31ZW0600
BBAU-3000001-3999999 Download Buy 4.07 MB 31ZW0601
BBAL-1000001-2999999 Download Buy 3.66 MB 31ZW0600
BBAL-3000001-3999999 Download Buy 4.07 MB 31ZW0601
BBAL-4000001-4199999 Download Buy 4.04 MB 31ZW0602
BBAU-4000001-4199999 Download Buy 4.04 MB 31ZW0602
BBAL-4200001-4399999 Download Buy 3.58 MB 31ZW0603
BBAL-4400001-4409999 Download Buy 3.7 MB 31ZW0604
BBAL-4410001-4499999 Download Buy 2.18 MB 31ZW0605
BBAL-4500001-4599999 Download Buy 8.75 MB 31ZW0606
BBAL-4600001-4699999 Download Buy 9.48 MB 31ZW0607
BBAL-4700001-4799999 Download Buy 10.11 MB 31ZW0608
BBAL-4800001-9999999 Download Buy 8.94 MB 31ZW0610
BBAJ-1000001-1099999 Download Buy 5.66 MB 00X31ZY96100KIT
BBAJ-1100001-9999999 Download Buy 6.93 MB 00X31ZY96210KIT

Performance Test

Boat Length Prop
ALUMAWELD 17 STRYKER 17′ – 0″ Solas 13 1/4 x 17 x 3
POLAR KRAFT V 186 T 18′ – 6″ Solas 13 7/8 x 19 x 3